RAD Replacement Filter for 3L Fill2Pure Filter Jug (Back order, arriving in Mid August)

Be the first to review this product

RAD Replacement Filter to fit the Fill2Pure Water Filter Jug.


Product Description


Rad Jug Replacement Filter (Back order, arriving in Mid August)

Instantly filters/reduces up to 99.99% of contaminants from water 

The jug filters for the pH Alkalising, Regular and RAD jugs are interchangable so you can buy any of Jug types and then try a different filter at a later date.

The filter capacity is 600 litres or approximately 200 refills.  There is no need to count the litres, our filters will not expire, but the flow will go slower and slower when it is time to change the filter. We remove the same percentage of contaminants at the end of the filter life as we do at the beginning. 

Size:  Each Filter is 9cm high, 10cm diameter.


Additional Information

Q: How much is it per litre using the replacement filters for the Regular Jug?

A: The cost per litre is approximately $0.11.

Q: Will it remove heavy metals?

A: Yes, we remove 99.99% of heavy metals instantly.

Q: Will the filter remove fluoride?

A: Yes, we remove up to 90% of fluoride instantly.

Q: How long does the filter last?

A: 600 litres, or approximately 200 refills. You can keep using the filter until it clogs and will no longer process water. Anything that comes through the filter is safe and pure.

Q: How will I know when to change the filter?

A: When the flow gets significantly slower.

Q: How fast does it take to fill the jug with filtered water?

A: Usually about 6 - 10 minutes. 

Q: Can I use with salt water?

A: No, to desalinate you would need a desalination machine or distiller.


Write Your Own Review

You're reviewing: RAD Replacement Filter for 3L Fill2Pure Filter Jug (Back order, arriving in Mid August)